Skip to content 
Product Introduction：
- The BSL30-E represents an advanced phased array detector which can effectively meet intricate phased-array detection needs and process detection information promptly.
- Furthermore, this system can be configured to accommodate two sets of TOFD inspection channels, facilitating the integration of dual-phased array scan with TOFD imaging. Its capabilities extend to conducting thorough scans and inspections of welds, encompassing a thickness of up to 100mm in a single operation.
The BSL30-E instrument has the following features:
- The focus law offers versatility by supporting multiple PA scanning methods, enabling simultaneous scanning and imaging.
- Incorporate a dual TOFD channel feature that facilitates integrated imaging through dual phased array TOFD (PAUT).
- Equipped with dual linear array (DLA) and double-sided array (DMA) capabilities for effective austenitic stainless steel detection.
- Facilitate the output of multi-channel video signals to distinct screen displays, along with feedback control.
- Support a dual-axis encoder interface for two-dimensional corrosion C scanning and wheel probe detection.
- Enable high-speed network transmission, allowing for real-time data uploading and downloading.
Parameters
| Parameter classification | Parameter remarks | Phased array channel | Conventional channel |
| PA/UT configuration | Receive/ transmit | 32/128 | 4-channel TOFD (2 pairs, one transmit and one receives) |
| Pulser | Pulse voltage | 50V-100V Continuously adjustable | 100V-350V Continuously adjustable |
| Pulse excitation method | Negative square wave | Negative square wave | |
| Pulse width | 30ns~500ns/2.5ns | 30ns~500ns/2.5ns | |
| Pulse rise time | <8ns | <15ns | |
| Repetition frequency | 200Hz -10KHz | 200Hz -1KHz | |
| Delay accuracy | 0-20us/2.5ns | 0-655us/10ns | |
| Transmit impedance | / | 500/25Ω | |
| Receiver | Gain range | 0~80dB | 0~110dB |
| System bandwidth | 0.5-20MHz | 0.5-15MHz | |
| Receive delay | 50us/2.5ns | / | |
| Data acquisition | Sampling Rate | 100MHz | 100MHz |
| Maximum A-scan length | 8192 | 2048 | |
| Focus mode | Regular/dynamic /full range | / | |
| Focus type | Depth/sound path/horizontal | / | |
| Scan and display | Detection wave | Positive detection, negative detection, full detection, radio frequency | Positive detection, negative detection, full detection, radio frequency |
| Scan type | S Scan/L Scan/Composite Scan | / | |
| Display mode | A/B/C/L/S/3D | A/B/C | |
| Programmable TCG | Number of points | 32 | / |
| Maximum gain | 40 dB, Gain step is 0.1 dB | / | |
| Maximum gain slope | 40 dB/us | / | |
| Data storage | SSD | 256G | |
| Monitor | Screen size | 10.1″ | |
| Resolution | 1280×800 | ||
| Touch screen type | Capacitive touch screen | ||
| I/O interface | USB | USB3.0/ USB2.0 | |
| Ethernet | 1000Mb/s | ||
| Video output mode | HDMI | ||
| Encoder | ODU-7PIN Dual encoder | ||
| Language | Chinese / English | ||
| Power supply | DC supply voltage | DC15V | |
| Battery | 11.1V-17AH | ||
| Continuous working time | No less than 4 hours | ||
| Total Weight | The whole machine without a battery is 3.6kg, battery 900g | ||
| Overall size | 340mmx230mmx100mm |
